Carburetor Parts Warehouse
4207 Ridge Rd.
Cleveland, Ohio 44144
(216) 635-1099
carbparts@hotmail.com
|
 |
A Push/Pull Throttle Assembly is required with use of all
Mikuni Racing Carburetors to assure the positive closing of the carburetor throttle slides
against the high vacuum pressures encountered in racing engines. The Mikuni Push/Pull
Throttle Assembly includes a twist throttle assembly and both throttle cables with
adjusters. |
| Push/Pull Throttle Assy.
Part No. KRS-001
|
 |
Velocity stacks improve the air flow into the carburetors
to increase induction efficiency and increase horsepower on racing engines where air
filters are not required. Set of 4 Velocity Stacks fits all Mikuni RS Series Carburetors
and other carburetors with 55mm O.D. intake bells. Choose length depending on chassis
clearance and desired tuning characteristics. |
| 30mm Mikuni Velocity
Stacks, Part No. KRS-002
50mm Mikuni Velocity Stacks, Part No. KRS-003
70mm Mikuni Velocity Stacks, Part No. KRS-004
15mm Mikuni Velocity Stacks, Part No. KRS-007
15mm Mikuni Velocity Stacks, Part No. KRS-007-BLK
|
All the jetting components necessary to allow the use of
methanol fuel with RS38 and RS40mm carburetors.
Mikuni RS Methanol Kit
Part No. KRS-005
|
Back